Installing Remote Heating Control

This is the second in a series of articles in which I am exploring Remote Heating Control – a technology of the future. Learn more about this series by reading the introductory article, called stepping into the future of smarter living.

In this article, I will be reviewing the installation of the technology I have had fitted in my home: Remote Heating Control.

The Parts

The install involved three main parts: the wireless hub; the wireless receiver; and a new thermostat.

Installation

The wireless receiver was installed first. This was installed near to my boiler, and receives the wireless signal from my new thermostat controller. The wireless receiver is connected to the boiler using a cable.

British Gas Remote Heating Control

My British Gas wireless receiver

After the wireless receiver was connected, Nick (the British Gas engineer who installed my technology) installed my new smart linked thermostat. This looked much more advanced than my previous thermostat controller, and wasn’t just a dial. My new thermostat controller has an LED display and four buttons for programming. Programming can be done via two main methods, on the device itself, or via the online portal. The online portal can be accessed either by smartphone or computer. The easiest way to manage my heating will be online.

British Gas Remote Heating Control

My British Gas smart linked thermostat

British Gas Remote Heating Control

My British Gas wireless hub

Finally, the wireless hub was installed. This is a small device, which plugged into my internet router and the mains – AC power supply. I needed one spare Ethernet port in my internet hub, and a free mains plug socket nearby, which I did. I imagine for most people the mains plug socket shouldn’t be an issue, as the likelyhood is that your router is near a plug socket, so an adapter plug or extension lead can be used. I would also imagine that you will have a spare Ethernet port in your internet hub, however if you are using all the available ports, you may need to buy an extension hub to ensure that you can still have all your devices connected.

How It Works

Here is a brief synopsis of what is now installed in my home, i.e. the technology that makes up Remote Heating Control. My boiler is now connected to a wireless receiver. This wireless receiver ‘talks’ (communicates wirelessly) with my smart linked thermostat, which communicates with my wireless hub. The wireless hub it plugged into my router and sends and receives information to and from the online portal.

To control my heating I can either login to the British Gas portal, online or via a smartphone app, text commands to my heating via SMS, or programme it manually. My new smart linked thermostat which can be used to control the system is wirelessly connected to my boiler. When I change settings on my smart linked thermostat, this affects the behaviour of my boiler, and the information is transmitted to British Gas, which updates the online system.

Opinions

I have a few opinions and thoughts on the installation that I would like to share with you.

The first is that Nick (the engineer) was very friendly, curious and acted professionally. He phoned me before his arrival to check it was okay with me still and let me know his estimated time of arrival.

When installing my wireless hub, Nick asked me to plug it in at the wall, and into my internet router. This is because he didn’t know exactly how my technology worked, and therefore didn’t want to damage it. I have a standard router, however I think it is good that he asked me to do it, yes it removes his liability, but it does mean that I know nothing was broken.

My impression of what British Gas staff (specifically engineers) are like is very good, Nick seem to be no trouble to deal with.

Regarding my smart linked thermostat, it is a little inconvenient that it runs on batteries. My old thermostat was directly wired into my boiler, however this one is wireless and takes two AA batteries. The batteries are no big deal really, I imagine it will get as routine as checking/changing a smoke alarm, however it is a task I had not anticipated I would need to do. That said, it will be easy to know when to change the batteries, as there is battery indicator online!

Online Control

In order to set up my online control I need to log in and get the devices to find each other. It was really easy, and the web based interface gives you a really well explained walk through. Once my devices had been discovered by the system, I was asked to create a four digit pin, which I would have to use when texting heating commands. If you get Remote Heating Control, it would be a good idea to write this down – which I did needless to say!

Next Time

In the next article in the series I will give you my first impressions of using Remote Heating Control for the first time. I will be exploring any issues I encounter, how it helps me, and the potential I believe it has.

How to get the most from your fibre optic broadband

While fibre optic internet coverage continues to grow, internet prices are continuing to decrease, meaning it’s never been a better time to upgrade your internet. That being said, if you intend on shelling out on fibre optic, its best you consider how you can ensure you make the most of what you pay for.

Upgrade your wireless router

If your internet supplier has not already provided you with a new wireless router, you may find the need to upgrade to make the most of your new high speed internet. Older routers on the whole tend to be around 50% slower than newer models, meaning investment is paramount if you want to make the most of your fibre optic connection. There is a huge array of routers on the market, with many different features. It’s advised that you go for a dual band router if you have many devices on your network as it will ensure a better connection that is less prone to interference.

Use an Ethernet cable

If you’re after the highest internet and data transferral speeds, connecting via an Ethernet cable is by far your best option. Wireless data is transmitted at a snail pace when compared to a cabled connection, which now has speeds of up to one gigabit on some routers, so really cuts down on the benefit of fibre optic broadband. Though far from practical, having a wired connection will enable you to really make the most of your internet connection.

The end of an Ethernet cable

The end of a red Ethernet cable – the colour has no significance, red just makes for a more vibrant image!

If you own a desktop, setup your router nearby so you can always have a wired connection for your PC. If not consider hiding cables in the wall throughout your home so you can have high speed connectivity throughout your home. If done right, it can even make your home more attractive when it comes to selling it!

Set up a media server

Modern hard drives now have functions which enable them to be used and accessed over your network, meaning you don’t need it to be plugged directly into your computer for it to work. Not only is this highly practical, it also allows multiple users to access information at the same time, without the need of cables.

Splash out on modern technology

Many modern devices now have some form of use for wireless internet, so splashing out on the latest devices will mean you can really make the most of your fibre optic connection. Many consoles such as the Xbox 360 or the PlayStation 3 will allow users to stream content from the internet or computer onto the TV. With a high speed connection, you can have many devices operating at full pelt without feeling like your connection is being throttled.