3D Printing and Health

3D printing technology undoubtedly presents opportunities for a completely new type of production that will revolutionize the workplace, as the many posts on this blog demonstrate. But as with all new forms of technology its development also raises many questions.

A cheap, commerical 3D printer

A cheap, commerical 3D printer

A recent report appears to find evidence that the use of 3D printers creates a bi product of nano particles that may be harmful to humans.

A research team measured ultra fine particle emissions (UFP) from the types of 3D printer typically in domestic or office use. Their findings are published in this rather technical report, and mathematics is certainly not my forte’, but it can be easily summarized: the results show that mean concentration of UFP’s is almost three times higher during 3D printer operation, meaning that these types of printers must be classed as UFP “high emitters”.

Now we need to see the results in context however, the levels reported are similar to those produced when we cook on a barbeque, but I personally use my barbeque in the garden, not in a small sealed room in the office.

The printers in question are often grouped together or found in air conditioned spaces with little ventilation, they are not sold with ventilation and there is no venting legislation, so the levels of UFP tends to increase over time in the spaces where they are used.

Particles of this type have been found to be damaging to mammals because they can easily pass into the respiratory system and cause inflammation. Some are so small that they can pass directly into the blood stream and into the organism itself.

The authors conclude that “caution should be used when operating some commercially available 3D printers in unvented or inadequately filtered indoor environments. Additionally, more controlled experiments should be conducted to more fundamentally evaluate aerosol emissions from a wider range of desktop 3D printers and feedstocks”.

A little common sense and some awareness raising and a health risk can be avoided. Industrial users have a culture of health and safety related to emissions, something that office culture might lack, but it could certainly be learned and implemented.

Anyway, the sun is out, where are those frozen veggie burgers?

Lumix Super Zoom TZ40 camera review

Here’s my overview of the Lumix Super Zoom TZ40 camera.

Housed in an ultra compact body, Lumix have packed into the TZ40 GPS, Near Field Communication, Wi-Fi and 20x Super Zoom.

Panasonix digital cameraThe 24mm ultra wide-angle 20x optical zoom lens is a Leica DC Vario-Elmar, which combines quality and versatility. Furthermore, Intelligent Resolution technology means that, even when using the zoom, deterioration of picture quality is kept to a minimum and is also available whilst in video-recording mode. Meanwhile, flare and ghost are kept to a minimum courtesy of the Nano Surface Coating of Panasonic’s black box technology.

A newly integrated 18.1 MP High Sensitivity MOS sensor provides high speed signal processing and high quality image recording, whilst new noise reduction and edge smoothing technology newly incorporated into the Venus Engine does exactly what it suggests. Meanwhile, a combination of the high-speed digital signal output technology, the light speed and the mechanical shutter realize full resolution 10 frames per second consecutive shooting.

Follow the simple guidance provided and the NFC technology and Wi-Fi connectivity allow you to connect the camera to tablets and smartphones by simply placing them in close vicinity. Then enjoy remote shooting, uploading and transfer.

The camera will also record HD videos which, courtesy of the 5-axis correction technology which can detect and compensate for operator movement, will seem like you shot them using a tripod.

The GPS function detects and records landmark, town, county and country information alongside photos and videos which can then be logged and reached quickly. For more information check out the camera on Panasonic’s website.

Top 10 Emerging Technologies

A couple of weeks ago the World Economic Forum published a document on its blog called “The top 10 emerging technologies for 2013”. I thought it might be interesting to have a look at what they say. The article can be read here. The comments are my own interpretation however.

World Economic Forum

1. Online Electric Vehicles.

About 100 years ago a scientist called Tesla demonstrated that electricity could be provided wirelessly. Today there is an idea that electric cars could drive while being recharged from electromagnetic fields created from cables under the road. The cars would need much smaller batteries of course.

The problem with this technology seems to be that it is difficult to measure how much power is taken, so difficult to bill for, nothing more than that. Take a look at this article about other ways of cutting pollution from transport systems.

2. 3D printing and remote manufacturing.

Much has been written and the technology undoubtedly carries advantages, but did you read my post about 3D printers potentially being used to make gun parts?

3. Self Healing Materials.

A great idea but this and other uses of nanotechnology and its production practices need to be regulated, as does the disposal of such materials. We don’t know enough about the effects upon human health as the recent report cited in another post on this blog demonstrates.

4. Energy Efficient Water Purification.

Must be a good thing. Some of Christopher’s thoughts on the issue here.

5. Carbon Dioxide conversion and use.

Geo-engineering offers the possibility of drawing carbon dioxide from the air and storing it underground, but this technology is extremely controversial. This article entitled Engineering a Solution to Global Warming gives an idea of some of the ethical debate surrounding such processes.

6. Enhanced nutrition to drive health.

Genetic modification of plants to make them more nutritional. Much has been written about the GM issue, it is certainly not as simple as it may sound. Great commercial interests are involved, as are problems of cross fertilization and non-reproducibility. See this article on the Bassetti Foundation website about the Vatican and its interests in the problem.

7. Remote sensing.

The buzz-phrase Smart City is all over nowadays. Have a look at this article for some ideas of how using sensors might improve urban life.

8. Precise drug delivery through nanoscale engineering.

Medicine is the area in which nanotechnology research shows its greatest potential. The problems of regulation still exist as brought up in the article above, but the possible advantages for society make this type of research extremely valuable.

9. Organic electronics and photovoltaics.

This article mentions solar panels made using fruit and vegetable juice instead of silicon, and the printing of circuits using organic materials is already a reality. Silicon is more efficient at the moment, but expensive, polluting and will eventually run out, but if scale is not a problem these solutions work well.

10. Fourth generation nuclear reactors and waste recycling.

Making nuclear energy cleaner and better is the goal. The questions of safety and sustainability as well as real cost are not raised however, again not an argument that can be expanded upon too much as it is extremely polarized, but there are cleaner and safer ways to produce electricity as the article about electricity generation cited above shows.

Well it looks like we got most of it covered at Technology Bloggers anyway, cutting edge as we are.